Evolver

Analog / Digital Synth, Stereo Audio Processor 16x4 sequencer

Courtesy/Thanks to: Dave Smith Instruments

Description: Evolver is a monophonic (one voice) synthesizer.
Four oscillators in total: two analog, two digital.
Analog Oscillator waveshape are Sawtooth, Triangle, Saw-Triangle, and Pulse (with voltage-controlled analog Pulse-Width modulation)
Digital Oscillators select from 96 wavetables from the Prophet-VS (128 x 12 bits), and 32 user-loadable (via MIDI) Wavetables (128 x 16 bits)
Hard Sync on the analog oscillators
FM and Ring Mod on the digital oscillators
Separate Glide per oscillator
Real voltage-controlled analog filters - not digital recreations. 4-pole/2-pole switchable lowpass, fully resonant. There are two separate filters, one for the left channel and one for the right.
Analog Voltage Controlled Amplifiers (VCA), again one for each channel.
Stereo audio inputs; Noise generator
Envelope Follower and Peak Detect from External Input to use as modulation sources
External Input can be used to gate envelopes and/or step the Sequencer
Three snappy ADSR envelopes
Four LFOs (sync with sequencer and MIDI)
Dual tunable feedback loops; modulate frequency and amount
Delay with 3 taps; each with separate modulation. Syncs to sequencer/MIDI. Normal feedback and separate feedback path through analog filters
3 Banks of 128 Programs for 384 total Programs - dump to/from MIDI

16 x 4 Analog-style sequencer - syncs with MIDI
Extensive Modulation capabilities, including audio-range modulation

Easy to program matrix-style front panel
A bunch of MIDI stuff
Evolver is 10.75" wide, 6" deep, and 1.5" high (27 x 15 x 4 cm)